Fonlink Photoelectric (Luoyang) Co., ltd
Quality is the life! High quality products make life beautiful!
Add to Cart
Fine Grain Tungsten Target For High Temperature Heating Elements
1. Product Details:
1. high purity, ≥99.95%
2. high density, 99% or higher
3. O content less than 20ppm
It's widely used in aerospace industry, rare earth industry, chemical equipment area, medical equipment area, melting equipment, oil industry etc.
Tungsten targets are our advantaged products.
They are covering the target to protect the surface of the target.
We can also bonding the target as customer requires.
We can produce not only flat target but also rotary target.
Sputtering target is a bombarding materials for preparing electronic thin film materials by physical vapor deposition. It is mainly used for the preparation of gate, sourse, drain and diffusion barrier materials in TFT-LCD/AMOLED display panels and semiconductor chips, as well the back electrode materials for thin-flim solar cells.
| Main content | W≥99.95% | |||||
| impurity contect (ppm) | Fe | ≤30 | Mg | ≤10 | Ni | ≤20 |
| Pb | ≤5 | Al | ≤20 | P | ≤10 | |
| Si | ≤20 | C | ≤30 | Ca | ≤20 | |
| Ca | ≤20 | O | ≤20 | Bi | ≤1 | |
| Sn | ≤5 | Mo | ≤40 | Sb | ≤5 | |
| Name | Molecular formula | Specification | Size | Relative density | Grain size | Defect rate | |
| Tungsten target | W | 4N(99.99%) | Inch | mm | ≥99% | ≯50µm | 0 |
| 5N(99.999%) | D(6,8,10,12) | Diameter 150~350 | |||||
| Tungsten Titanium Target | WTi10 | 4N(99.99%) | ≥99% | ≯50µm | 0 | ||
In addition,We can aslo supply the following products if you are interesting in:
| molybdenum products | molybdenum rods/molybdenum plate/ molybdenum sheet |
| molybdenum wire/spray moly wire/moly wire for EDM | |
| molybdenum electrode/moly disk | |
| molybdenum boat/molybdenum crucible/ moly tube | |
| tungsten products | tungsten rods/tungsten plate/tungsten sheet |
| tungsten wire/tungsten electrode | |
| tungsten crucible/ tungsten boat/ tungsten tube | |
| other special shape | |
| alloy products | TZM products/ mola products |
| WNiFe/ WNiCu product/ Alloy ball/ WC-Co | |
| MoCu/ WCu rods or sheet |
2. Company Introduction
3. Company Certificate
4. Production Equipment
5. Production Process
6. Inspection Instrument:
We have kinds of inspection equipments. Such as:
(1) hardness tester; (2) SEM-EDS Scanning electron microscope;
(3) Granulometer; (4) X-Ray fluorescence spectrometer
(5) Microscope; (6) Transmission electron microscope;
(7) X-ray diffractometer;
(8) AAnalyst 800 atomic absorption spectrophotometer;
7. Packing & shipping for Tungsten Crucible :
To ensure the safety during transportation, products will be packed accordingly with exportable wooden box with foam sheet protection inside.If customer has special packing requirments, we will try to meet them.
Contact Information:
Betty Sale Manager
LuoYang Sifon Electronic Co.,LTd